3.2.1
LED Descriptions
This section describes the LEDs on the front panel of the chassis.
3.2.1.1
SYS LED
The SYS LED indicates the device's operating status, as described in the table below.
Color
Green
Orange
Red
3.2.1.2
TEL LED
The TEL LED indicates the status of the FXS blades, as described in the table below.
Color
Green
Orange
Red
-
Hardware Installation Manual
Table 3-3: SYS LED Description
State
On
LED lit as a result of one of the following:
Device is operating normally
During first stage of boot up when device is powered on
On
Chassis is approaching high temperature threshold, but not
yet critical
On
LED lit as a result of one of the following:
Fault detected in CPU module
Incompatible or faulty software version (.cmp file)
detected during boot up
Approaching critical high temperature threshold
Off
No power
Table 3-4: TEL LED Description
State
On
LED lit as a result of one of the following:
During booting up phase
During normal operation, indicating normal FXS blade
operation
At least one DSP has reached the high temperature threshold
On
LED lit as a result of one of the following:
During initial phase of power-up
Failure detected in at least one FXS blade
No FXS blades detected in the chassis
Off
No power.
Description
Description
16
MP-1288
Document #: LTRT-28030