Intellian v45C Installation & Operation User Manual page 82

v45C - Maritime VSAT Antenna System
No. Item
Network Service
3
Configuration
Sys Log
4
Configuration
Radius
5
Configuration
Description
Sets the network service configuration
• Telnet Service: sets the telnet service (Disable / Enable).
• HTTPS Port: sets the HTTPS port number.
• SSH Service: sets the SSH service status (Disable / Enable).
Click the Apply button to apply the settings to the system.
Sets the system log configuration. Antenna sends log messages according
to the emergency level. Enabling this function sends the message to your
management server.
• Management Server: sets the management server status (No / Yes).
• Server IP: sets the management server IP address.
• UDP Port: sets the management port.
• Message Type: selects message type (Intellian message level) to send to the
management server (Lower number indicates higher emergency).
• Syslog Target Level: if you select this target level, the management server
receives a log message equal to or less than this level.
Click the Apply button to apply the settings to the system.
This menu is used when the network administrator needs to authorize user
connections using Radius server.
• Client: sets the Radius authentication (Disable / Enable).
• Server IP: sets the Radius server IP Address.
• Timeout: sets the Timeout value in seconds for the authentication process.
• Server Secret: sets the Pass-Phase. This should be matched between server
and ACU.
Click the Apply button to apply the settings to the system.
82