Starting Install Wizard - Intellian v45C Installation & Operation User Manual

v45C - Maritime VSAT Antenna System

7.4 Starting Install Wizard

The Install Wizard will give you a guide by going through the steps of setup for the antenna system
commissioning. We highly recommend using this wizard to complete the installation and commissioning
of the system. You can exit the wizard at any time by clicking the Finish button. You can also skip steps
by clicking the Next button. Before you start, make sure the basic devices (antenna, modem, etc) are
connected to the ACU properly. After accessing the AptusNX main page, go to the INSTALL WIZ. on the
main menu then follow these steps.
NOTE
Refer to the "Chapter 8. Using AptusNX" on page 54 for detailed description of each function.
NOTE
ü Welcome Page
ü
Step 1: GPS
Welcome message is displayed. Click
the Next button to start.
Set the GPS position of the vessel for
the satellite searching. Check the GPS
status connected to the antenna system.
The colored indicator next to the title
shows the GPS status. Make sure the
GPS indicator is Blue (blinking).
• Blue (blinking): The system received a
correct GPS signal.
• Red: The GPS signal is abnormal, or
the received value is incorrect (Error).
• Black: The system has not received
any GPS signal. You can enter the GPS
value manually to set the GPS position.
Click the Next button to go to the next
step.
44