Chapter 7. Operating Install Wizard
7.1 Turning On System
Make sure the antenna has a clear view of the sky. Press the POWER button on the front panel of the
Antenna Control Unit (ACU), then wait a few minutes for system startup. Once the antenna finds the
satellite, the POWER indicator will turn Green.
7.2 Accessing AptusNX
The network is automatically configured by DHCP with no additional PC IP configuration.
1. Connect an Ethernet cable from the Management LAN port on the ACU front panel to a LAN port of PC.
2. The network connection is established automatically.
3. Use the following IP address to access Intellian AptusNX page.
• IP Address: 192.168.2.1 (Default)
4. Log into the AptusNX by entering User ID and Password.
• User ID: intellian (Default)
• Password: 12345678 (Default)
ACU - Front Panel
Management LAN Port
Figure 27: Front Panel Management LAN Port Connection
PC
(Not supplied)
41
Operating Install Wizard
Need help?
Do you have a question about the v45C and is the answer not in the manual?
Questions and answers