Table of Contents
Advertisement
3
Installation
3.1
Mechanical installation
3.1.1
Mounting of the polycarbonate enclosure
• Drill the mounting holes according to the mounting template below.
• Mount the bottom part of the enclosure with 4 screws (screw diameter < 4.2 mm
included in the scope of supply).
Polycarbonate enclosure
7
(0.28")
Fig. 5
Dimensions and mounting template of polycarbonate enclosure in mm (inch)
The four housing screws shall be tightened loosely first. Then tighten the screws diagonally with a
torque wrench to 2 Nm
3.1.2
DIN rail mounting of the polycarbonate enclosure
• Mount the two DIN rail brackets (to be ordered separately, see chapter 7 Replacement Parts / Acces-
sories) onto the back side of the enclosure.
• Snap in the enclosure onto the DIN rail
Fig. 6
DIN rail installation
Operating instructions for EE360 Moisture in Oil Transmitter
180
(7.09")
166
(6.54")
153
(6.02")
5.1
(0.20")
166
(6.54")
± 0.5 Nm
(18 Lb In.)
(4.4 Lb In)
71
(2.80")
5.1
(0.20")
.
, not
(0.2")
7
Advertisement
Table of Contents
