Installation; Mechanical Installation; Standard Mounting Of The Enclosure; Din Rail Mounting Of The Enclosure - E+E Elektronik EE310 Operating Manual

3

Installation

3.1

Mechanical installation

3.1.1

Standard mounting of the enclosure

• Drill the mounting holes according to the mounting template below.
• Mount the bottom part of the enclosure with 4 screws (screw diameter < 4.2 mm
included in the scope of supply).
7
(0.28")
Fig. 4 Dimensions and mounting template of polycarbonate enclosure in mm (inch)
3.1.2

DIN rail mounting of the enclosure

• Mount the two DIN rail brackets (to be ordered separately, see chapter 8 Replacement parts /
Accessories) onto the back side of the enclosure.
• Snap in the enclosure onto the DIN rail
Fig. 5 DIN rail installation
Operating instructions for EE310 Humidity / Temperature Transmitter
180
(7.09")
166
(6.54")
153
(6.02")
5.1
(0.20")
166
(6.54")
71
(2.80")
5.1
(0.20")
, not
(0.2")
7