Table of Contents
Advertisement
3
Installation
3.1
Mechanical installation
3.1.1
Mounting of the polycarbonate enclosure
•. Drill the mounting holes according to the mounting template below.
•. Mount the bottom part of the enclosure with 4 screws (screw diameter < 4.2 mm
included in the scope of supply).
7
(0.28")
Fig. 4
Dimensions and mounting template of polycarbonate enclosure in mm (inch)
3.1.2
DIn rail mounting of the polycarbonate enclosure
•. Mount the two DIN rail brackets (to be ordered separately, see chapter 8 Replacement parts / Acces-
sories) onto the back side of the enclosure.
•. Snap in the enclosure onto the DIN rail
Fig. 5
DIN rail installation
Operating instructions for EE360 Moisture in Oil
180
(7.09")
166
(6.54")
153
(6.02")
5.1
(0.20")
166
(6.54")
71
(2.80")
5.1
(0.20")
, not
(0.2")
7
Advertisement
Table of Contents
