Table of Contents
Advertisement
IP Parameters
An Internet Protocol (IP) address and associated routing parameters must be entered within the IP menu
of the EXTender for identification purposes within the LAN.
Note: The network administrator must provide the IP address and any required mask or router addresses.
Settings The following IP settings are required:
Address- This is the IP address of the EXTender.
Subnet Mask – A number used to identify the IP subnetwork on the LAN.
Default Router – The address of a device used to reach IP hosts not on this IP sub-network.
Procedure
1. Access the IP Menu using the following path;
Path: ->Configuration->IP->Address
The following menu appears:
2. Press the
key to access the parameters.
3. Press the
key to the Address parameter. Enter the IP Address of the EXTender and press Enter.
4. Press the
key to the Subnet Mask parameter. Enter the IP Address of the Subnet Mask and press
Enter.
5. Press the
key to the Default Router parameter. Enter the IP Address of the Default Router and
press Enter.
6. Press the
and
file.
EXTender 6000 Quick Installation Guide
Figure 20:
key to the Save option. Press Enter to save changes to the active config (.rem)
IP Address Menu
30
Advertisement
Table of Contents
