Clock Setting - Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual

Clock setting

This function allows user to set or adjust the time.
You enter the Setting Menu. Select "CLOCK SET" option, by pressing button (1) or (2).
Once function is highlighted, press button (4). You open the "CLOCKSET" Menu.
Note
Every time the battery is disconnected, the clock is reset and must be set again by the user.
When entering the function, available settings are indicated on the left: HOUR, MINUTE, AM / PM, while set time is
indicated on the right (e.g.: 10 : 30 a.m.).
Setting AM/PM
Select "AM/PM" option, by pressing button (1) or (2).
Once highlighted, press CONFIRM MENU button (4).
The value will start flashing.
Select AM or PM option, by pressing button (1) or (2) respectively.
Once you reach the value to be set, press button (4) and the set value will stop flashing.
Setting the hours
Select "HOUR" option, by pressing button (1) or (2).
Once option is highlighted, press button (4). Hour value starts flashing.
Press button (1) to decrease hour value by 1 unit: 12, 11, ... 1, 12.
Press button (2) to increase hour value by 1 unit: 12, 1, ... 12.
Once you reach the value to be set, press button (4) and the set hour value will stop flashing.
Setting the minutes
Select "MINUTE" option, by pressing button (1) or (2).
Once highlighted, press CONFIRM MENU button (4).
Minute value starts flashing.
Press button (1) to decrease minute value by 1 unit: 59, 58, ... 00, 59.