Tighten the sensor securing screw fully home every time you add or remove shims.
Once the shimming is completed, tighten the sensor retaining screw to a torque of 10 Nm ± 10%.
For the shimming, use two feeler gauges (A) of 0.2 mm and 0.5 mm.
Warning
Shim pack shall never exceed 3 mm.
Note
Perform the test in three points of the phonic wheel, at a distance of 120° one from the other.
Refit the front brake master cylinder
Fill the front braking system
(Refitting the front brake master
(Changing the front brake system
cylinder).
fluid).