Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual page 588

Adjusting the AIR-GAP of phonic wheel sensor
Warning
The following procedure applies to both vehicle versions.
(For front as well as rear sensor) In each case of maintenance that foresees:
- replacement or refitting of the wheel;
- replacement or refitting of the phonic wheel (1) or (2);
- replacement or refitting of the brake discs;
- replacement or refitting of the speed sensor (3) or (4);
- (front) replacement or refitting of the sensor holder bracket;
- (rear) replacement or refitting of the calliper holder plate.
It is necessary to check the air-gap between the speed sensor and the phonic wheel, once the components are
refitted.
For this purpose, use a feeler gauge to check the air-gap; then, carry out 3 measures of the air-gap, one every
120° of wheel turn.
There must be a gap between ABS sensor and phonic wheel of 1.3 mm to 1.9 mm. To check it, use a suitable
feeler gauge.