Setting the units of measurement: Fuel consumption
This function allows you to change the units of measurement of the fuel consumption.
You open the "UNITS SETTING" menu, as described on the previous pages.
Select "CONSUMPTION" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU button (4). You open the "CONSUMPTION" menu.
When you enter the function, the current unit of measurement is displayed, followed by the list of the possible
units: L / 100km, km / L, mpg (UK), mpg (USA).
Press buttons (1) and (2) to highlight the units of measurement one by one: in particular, use button (1) to
highlight the following item and button (2) to highlight the previous item.
Select the required unit of measurement and then press the CONFIRM MENU button (4) to confirm: the selected
unit is stored and the "EXIT" option is highlighted.
The selected unit of measurement will be used by the instrument panel for the following indications:
-
Instantaneous fuel consumption and Average fuel consumption.
Setting the units of measurement: Reset to automatic settings
This function allows you to restore the automatic settings for the units of measurement of all indications displayed
on the instrument panel.
You open the "UNITS SETTING" menu, as described on the previous pages. Select "DEFAULT" option, by pressing
button (1) or (2).
Once function is highlighted, press CONFIRM MENU button (4) for 3 seconds. WAIT... will be displayed for two
seconds, and then the UNITS SETTING menu page with the EXIT option highlighted.
To exit the menu and go back to previous page, select EXIT and press button (4).