Refitting the side stand
Reassembling the side stand
Insert the duly lubricated side stand (8) and fit it to the plate (3). Secure it with the pin (7) and the nut (9).
Tighten nut (9) to a torque of 20 Nm ± 10%.
Position the side stand return springs (5) and (6) and attach them to fasteners (B) and (C) on bracket and stand.
Place the switch (1) on the plate, on its pin (7).
Fit the retaining screw (4) with recommended threadlocker and tighten to a torque of 5 Nm ±10%.
Refitting the side stand
Position the side stand bracket (3) to the frame and fit the two screws (2) smeared with recommended
threadlocker.
Tighten screws (2) to a torque of 43 Nm ± 10%.