Refitting the brake discs
Warning
The following procedure applies to both vehicle versions.
Before refitting the brake disc to the wheel, clean all contact surfaces thoroughly and apply the indicated
threadlocker on the threads of retaining screws (1).
LEFT SIDE
Fit the phonic wheel (3).
Tighten the screws (1) retaining the brake disc (2) to the wheel following this sequence: 1-3-5-2-4.
Tighten screws (1) to a torque of 25 Nm ± 5%.
RIGHT SIDE
Follow the same procedure performed for the LH disc, except for the indications regarding the phonic wheel.