Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual page 461

Trip time (TRIP TIME)
The instrument panel calculates and displays the trip time as hhh:mm followed by TRIP TIME. The calculation
considers the time since TRIP1 was last reset. When TRIP1 is reset, this value is reset as well. The time count
active phase occurs when the engine is running and the motorcycle is stopped (the time is automatically stopped
when the motorcycle is not moving and the engine is OFF and restarts when the counting active phase starts
again).
When the reading exceeds 511:00 (511 hours and 00 minutes), the meter is reset and automatically starts
counting from 0 again.
Considering that the FULL and CORE layouts show the values for this function in a similar way to the TRACK
layout, the example shown depicts the function in TRACK layout.
If you change the unit of measurement for an item connected to Speed (and distance) or Consumption or after a
Battery-OFF, the trip time value will be automatically reset.
Note
If you change the unit of measurement for an item connected to Speed (and distance) or Consumption or after a
Battery-Off, the trip time value will be automatically reset.