Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual page 424

PIN CODE
This function allows the user to activate or modify the PIN CODE.
The PIN CODE is initially not present in the motorcycle, it must be activated by the user by entering his/her 4-digit
PIN in the instrument panel, otherwise the motorcycle cannot be started temporarily in the case of a malfunction.
To activate this function, refer to "Activating the PIN CODE" procedure.
To change the PIN refer to "Changing the PIN CODE" procedure.
In order to temporarily start the motorcycle in case of malfunction, please refer to the Vehicle Overriding
procedure .
Warning
The motorcycle owner must activate (store) the PIN code; if there is already a stored PIN, contact an Authorised
Ducati Dealer to have the function "reset". To perform this procedure, the Authorised Ducati Dealer may ask you
to demonstrate that you are the owner of the motorcycle.
Activating the PIN CODE
To activate the PIN CODE function and enter your own PIN CODE you must open the Setting Menu.
Select PIN CODE option, by pressing button (1) or (2).
Once function is highlighted, press button (4).
You open the PIN CODE menu.
When entering the function, the display shows the message INSERT NEW PIN CODE followed by the first digit in
green and three dashes "0 - - -".
Entering the code:
1 Press button (4), only one digit indicating "0" turns green;
2 Each time you press the button (2) the displayed number increases by one (+ 1) up to "9" and then starts
back from "0";
3 Each time you press the button (1) the displayed number decreases by one (- 1) up to "1" and then starts
back from "0";
4 To confirm the number, press the button (4);
Repeat the procedures until you confirm all the 4 digits of the PIN CODE.