Vehicle Pre-Delivery - Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual

Vehicle pre-delivery

1 Transport packaging integrity visual check (where applicable)
2 Transport packaging removal (where applicable)
3 Motorbike integrity visual check
4 Check of the supplied kit completeness (refer to the parts list supplied together with the kit)
5 Install the handlebar and the controls (where applicable)
6 Assemble rear view mirror
7 Assemble windscreen
8 Battery start-up and fitting on the vehicle
9 Check correct final drive tensioning
10 Tyre pressure check:
- Front: 2.5 bar (rider only) - 2.5 bar (with passenger and/or bags)
- Rear: 2.5 bar (rider only) - 2.9 bar (with passenger and/or bags)
11 Check brake and clutch fluid and coolant level (top up, if necessary)
12 Check engine oil level (top up, if necessary).
13 Lights, turn indicators, horn and controls check. Headlight beam height adjustment check. Check handlebar
free movement and possible interference
14 Check active key and passive key operation: check steering lock correct operation both on the right and on
the left
15 Time and date setting and check of correct unit setting according to the country version.
16 Check front and rear wheel shaft tightening
17 Check the brake calliper retaining screws tightening
18 Fuel filling up until the reserve warning light turns off (approx. 5 litres)
19 Check engine stop switch, side stand switch and clutch lever operation.
20 Check the presence of any technical updates and recall campaigns on DCS
21 Check of Software version updates on control unit (use the Global Scan function) and reading of fault memory
with the DDS 2.0
22 Install any Ducati Performance accessories required by Customer's order and check their operation.
23 Final inspection and road test (safety devices, electric fan, cruise control and heated handgrips correct
operation check)
24 Softly clean the motorcycle
25 Motorcycle warranty activation and on-board documentation filling in (General warranty conditions).
26 Show the Customer the maintenance plan, the bike operation (see bike delivery Check List) and the rider seat
height setting
27 Turn in to Customer the kit documentation and the Service Booklet (appropriately filled in).
Bike pre-delivery
- Check of bike conformity with the purchase agreement (version, model, no aesthetics flaws)
- Check of accessory presence and their operation (if any according to the contract)
- Removal of the protective films from the instrument panel and reminding the Customer that the lens could be
stained if in contact with oils/fuel
- Hands Free system: use of the keys (active black and passive red) and battery replacement procedure, Key-ON
and Key-OFF, starting and stopping the engine, engaging and releasing the steering lock
- Pin Code: entering the personal code and emergency starting using the Pin Code (without keys)
- Buttons on the LH switch: high-beam flasher, high beam activation, turn indicator activation and deactivation,
horn activation, Hazard button (simultaneous flashing of the 4 turn indicators) and relevant warning lights on the
instrument panel
- FULL LED cornering headlight operation (S version only)
- Supplementary LED lights: operation and relevant warning light on the instrument panel (if present)
- Heated handgrips: operation and relevant warning light on the instrument panel (if present)
- Riding mode (Sport-Touring-Urban-Enduro): operation and parameters connected to each Riding Mode
- Cruise Control: operation, enabling/disabling and relevant warning light on the instrument panel
- DTC (Ducati Traction Control): operation, setting to 8 levels + off customisable per each Riding Mode and
relevant warning light on the instrument panel
- ABS (Antilock Braking System) with cornering function: operation, setting to 3 levels + off customisable per each
Riding Mode and relevant warning light on the instrument panel
- DWC (Ducati Wheelie Control): operation, setting to 8 levels + off customisable per each Riding Mode and
relevant warning light on the instrument panel
- DSS (Ducati Skyhook Suspension): operation, setting and variation per each Riding mode. Preload adjustment of
the rear monoshock in accordance to vehicle load (S version only)
- DMS (Ducati Multimedia System): operation, pairing of the Bluetooth systems (smartphone, navigator, rider and
passenger earphones), indication on the instrument panel of the missed calls, incoming calls, text
messages/emails and player function
- Adjustment of the windscreen height