Odometer (Tot) - Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual

Odometer (TOT)

The odometer counts and displays the total distance covered by the motorcycle with the set unit of measurement
(km or mi).
The odometer number (in km or miles) is displayed with the message TOT and the indication of the unit of
measurement. When the maximum value is reached (199999 km or 199999 mi) the instrument panel will
permanently display said value.
The odometer value is saved permanently and cannot be reset under any circumstances.
Considering that the FULL, CORE and OFF ROAD layouts show the values for this function in a similar to the TRACK
layout, the example shown depicts the function in TRACK layout.
The reading is not lost in case of a power OFF (Battery OFF).
Note
If a string of flashing dashes " ----- " is displayed within odometer function, please contact a Ducati Dealer or
Authorised Service Centre.
Odometer update
When replacing the Instrument Panel or the Black Box, restore the odometer value inside the replaced control unit
so as to allow the correct displaying of the kilometres or miles covered by the vehicle.
Covered kilometres/miles must be restored by transferring the datum from the control unit still left inside vehicle
to the new control unit just replaced.
This procedure must be carried out through the "DDS 2" instrument.
The instrument panel will continue displaying flashing dashes "_ _" instead of the odometer value until this
procedure is carried out.
Once the procedure is completed, its positive outcome will be signalled by the odometer datum displayed on
instrument panel.