Checks After Coupling Up; Checking The Connection State; Driving Precautions - Daewoo Novus M2SEF Manual

https://www.truck-manuals.net/
5-149 MISCELLANEOUS CONTROLS AND OPTIONS
MTF0490
MTF0500

3) Driving precautions

MTB0380
MTA0930

(2) Checks after coupling up

1. Checking the connection state

a. Pull the brake lever of the trailer to apply
the brake only to the trailer. Then, start
up the tractor with gears being put in 1st
or 2nd position.
b. Repeat the above munipulation 2 to 3
times. Then, if you feel as if you float
greatly with the driver's seat, it means the
tractor and trailer have been connected
satisfactorily with each other.
2. Make sure that all the lamps on the trailer
operate properly.
3. Operate the engine to check if the oil pres-
sure is normal(8.2kg/cm
(1) Avoid hard acceleration, hard stops and sharp
steering since they creat not only hazardous
conditions but also give on adverse affect over
the vehicle.
(2) Pull the brake lever of trailer to apply the brake
only to the trailer when descending a zig zag
slope or an indented road.
).
2