Turn Signal Switch; High Beam Switch; Passing Lamp Switch; Lamp Switch(Turn Type) - Daewoo Novus M2SEF Manual

high beam
(passing)
low beam
high beam
2nd stage
1st
stage
OFF
https://www.truck-manuals.net/
MTA0621
MTA0150
MTA0160
MTA0170
1-11 HOW TO HANDLE THE VEHICLE
Caution
1. Daewoo heavy trucks are equipped with the preheat-
ing and postheating systems designed to improve
engine starting and to reduce the generation of white
smoke.
2. With the starting key positioned "On", it is automati-
cally preheated according to the temperature of cool-
ant. In 0.3 second(in hot season) or 18 seconds(in cold
season), the preheating indicator lamp goes out, indi-
cating that preheating is complete.
•
hot season: above 10C of coolant tem-perature(DE
engine), or above 25C(DV engine)
•
cold season: below 10C of coolant tem-perature(DE
engine), or below 25C(DV engine)
3. If you start the engine before the preheater warning
lamp goes out, the postheating system would not work,
resulting in increase in white smoke.
4. For 24ton dump truck, the engine is preheated by
Electronic Control Module (ECM)
•

Turn signal switch

Move this combination switch lever in the
desired direction so that the corresponding turn
signal lamp operates and causes the turn signal
indicator lamp on the instrument panel to flash.
The switch lever returns automatically to the
neutral position when the steering wheel is
returned to the reverse direction. When head
lamp switch is in 2nd stage simultaneously with
turn signal lamp "ON", cornering lamp also
comes on.
•

High beam switch

When the head lamps are on, pulling the lever
down lights up not only the head lamps with high
beam but also the high beam indicator lamp.
When pulling it up, head lamps with low beam
are on.
•

Passing lamp switch

To light up passing lamps at any time, pull up
the lever towards the steering wheel. The lever
will return to the OFF position when released.
•

Lamp switch(turn type)

Lamp switch operates in two stages as follows:
1st stage: tail lamp, license plate lamp, ins-
trument panel lamp, clearance lamp
2nd stage: tail lamp, license plate lamp,
instrument panel lamp, clearance
lamp, head lamp, cornering lamp
(simulaneously with turn signal
lamp "ON")