Coolant Filter(For Ddc Engine); Element Change Intervals; How To Replace Elements - Daewoo Novus M2SEF Manual

3-83 INSPECTION AND MAINTENANCE
https://www.truck-manuals.net/

14) Coolant Filter(for DDC engine)

MTC0281
The engine cooling system filter is a compact by-
pass type unit with a replaceable spin-on type el-
ement.
Any impurities such as sand and rust particles
suspended in the cooling system will be removed
by the straining action of the element. The removal
of these impurities will contribute to longer water
pump life and proper operation of the thermostat.
•

Element change intervals

Coolant filter elements must be replaced with new
ones every 24,000km operation.
•

How to replace elements

1. Close the coolant filter inlet and outlet shut
off valves.
2. Remove and discard the element.
3. Clean the filter adapter with a clean, lint-free
cloth.
4. Lightly coat the new coolant filter seal with
clean engine oil.
5. Install the new element. Tighten the element
until the seal contacts the filter adapter.
Tighten an additional 2/3 of a turn.
6. Open the coolant filter and outlet shut off
valves.
7. Run the engine, and check for leaks.
8. Add coolant, if required.
Caution
Be sure to keep change period to prevent the en-
gine cavitation since the coolant filter has the com-
ponent for anti corrosion.