Starting The Engine In Cold Weather; Stopping The Engine - Daewoo Novus M2SEF Manual

Table of Contents

Advertisement

https://www.truck-manuals.net/
ON
START
LOCK
LOCK
ON

3) Starting the engine in cold weather

(1) With the switch in the "ON" position the indica-
tor lamp will light up showing the engine is pre-
heated automatically. After pre-heating is com-
pleted, the indicator lamp will go out.
(2) After pre-heating is completed, press the clutch
pedal and accelerator pedal to start the engine.
(3) Use the idle control knob to idle the engine at a
moderately fast speed.
Normal idle speed: 550~600 rpm
MTB0200
(4) For DDC engine, as idle speed is controlled by
means of ECM automatically, you need no spe-
cial operation
(5) Avoid unnecessary idling of the engine when it
reaches normal temperature.
Abrupt start during warming-up operation may
shorten the engine life.
(6) After warming up the engine, bring the idle con-
trol knob back to its original position.
MTA0621

4) Stopping the engine

Sudden stopping of the engine with full load or
*
after ascending a slope causes overflow of cool-
ant. In this case, idle the engine for 1 or 2
minutes(DDC Engine : for 4 or 5 minutes) be-
fore stopping it.
MTB0180
Diesel engine is apt to keep running even after
*
the starter switch is off. If it continues to run even
after the starter switch is off, place the starter
key again in "ON" position to start the engine.
Otherwise, alternator circuit may fail.
MTB0230
Caution
2-57 DRIVING

Advertisement

Table of Contents
loading

Table of Contents