How To Operate; Operating Of The Clutch; Towing Away - Daewoo Novus M2SEF Manual

https://www.truck-manuals.net/
MTF0320
MTC0800
5-133 MISCELLANEOUS CONTROLS AND OPTIONS

(7) How to operate

a. When operating the vehicle, be plainly
dressed, and make sure of the route in ad-
vance keeping busy or smooth traffic sec-
tions and obstacles in mind.
b. On slopes, gear down appropriately in ad-
vance. On the downgrade, use the same
change group as that for slopes.
c. Namely, if running up a slope with the 5th
gear applied, use the 5th gear on the down-
grade, too and do not use a high gear(8th
gear).

(8) Operating of the clutch

The clutch pedal must always be depressed fully
for each gear shift movement.
If the clutch is not engaged or disengaged com-
pletely, or if the clutch discs have been exces-
sively worn, gearshift problems will occur. In ad-
dition, wear on the synchronizers and at the
gear teeth and dogs will be greatly increased.

(9) Towing away

If the vehicle suffers a breakdown and has to be
towed away, note the following precautions.
a. If the towing distance is 50km or less
Put the gearshift lever in the neutral
position(on the shaft for the 5th and 6th
gears) in the HIGH range and keep the tow-
ing speed within 60 km per hour. If the gear-
shift lever would not be put in the neutral
position,disconnect the rear axle shaft be-
fore having your vehicle towed.
b. If the towing distance is more than 50km
Separate the propeller shaft from the rear
axle.