5-120 MISCELLANEOUS CONTROLS AND OPTIONS
https://www.truck-manuals.net/
MTF0120
MTF0141
MTF0130
(5) Setting of clock
Set the time by turning the time setting knob as
necessary.
(6) Setting of recording chart paper set
•
Position the recording chart paper set under the
knife, then align the time on the paper with the
red color mark near the knife. Install the retain-
ing ring by turning it clockwise while depress-
ing it. (Fig1,2)
•
Open the lid, and then put the recording chart
paper after alignment the hole of recording chart
paper with the hole of tachograph.(Fig3)
(7) Replacement of 7-days recording chart paper set
Check to see if the tape wound around the re-
cording chart paper set has not been cut off.
If the tape is found to be cut off, replace the
entire paper set with a new one. (Fig1,2)
The 7-days recording chart paper set should be
replaced weekly. (Fig 1,2,3)