Table of Contents
Advertisement
ZF16S-221 T/M
5
Splitter
switch
https://www.truck-manuals.net/
7
3
N
1
4
8
2
6
R
Range change switch
MTA0911
MTA0930
MTA0940
MTA0950
1-43 HOW TO HANDLE THE VEHICLE
In the case of ZF16S-221 transmission, when
*
preparing to shift from 4th to 5th position, press
the upper edge of the range change switch and
then depress the clutch pedal and push the
gearshift lever into the 1st position. When shift-
ing from 5th to 4th position, reverse this proce-
dure.
•
Trailer hand brake lever
(for tractor and pull cargo)
Use this brake lever when preparing to reduce
only trailer speed on a downhill.
•
Accelerator pedal
To avoid unnecessary increase in fuel con-
sumption, the accelerator pedal should be
operated smoothly and reasonably. Make sure
that injection pump lever reaches maximum
speed stopper when pressing accelerator pedal
fully. If the lever won't reach the stopper, use
accelerator pedal cable adjusting nut to adjust
the cable length.
•
Brake pedal
When stopping your vehicle, do not press the
pedal forcibly but try to press it repeatedly. On a
downhill, use this pedal together with exhaust
brake as required.
Advertisement
Table of Contents
Troubleshooting
