Selecting The Desired Station; Seek Function Using A.me Button; Selecting A Station Using The Preset Button; Storing The Desired Station In The Memory - Daewoo Novus M2SEF Manual

1-40 HOW TO HANDLE THE VEHICLE

SELECTING THE DESIRED STATION

*
1. Tuning button
Either press this button once to adjust frequency by each step or press and hold for quick adjustment.
2. SEEK button
Press this button to automatically seek for the next available station.

3. SEEK function using A.ME button

1) Press this button for less than 2 seconds to scan through every station stored in the memory.
Scanning stops at each station for 5 seconds. While each station is scanned through, the
corresponding channel(1-6) blinks on the LCD panel. After remaining for 5 seconds at each
station, it will be switched to the next station. When the desired frequency is received, press
this button again to continue listening to it.
2) Press and hold this button for more than 2 seconds. Including the currently tuned station, the
next six stations in the selected band are stored in the preset buttons(1-6). (Auto memory
function)

4. Selecting a station using the preset button

press
1
press
2
5. How to adjust time
1) It may be necessary to adjust current time following battery change or repair. To adjust the
current time, perform the following procedure:
2) Make sure the LCD panel displays time. (If frequency is displayed, press F/C selection button.
Time will appear on the LCD panel.)
https://www.truck-manuals.net/
FM1
CH
FM1
CH
MTA0870
Press the button to which the desired frequency is
stored(Channel number and frequency appear on the
LCD panel).
•

Storing the desired station in the memory

After selecting the desired station, press and hold
the preset button (a desired number among 1-6)
for more than 2 seconds to automatically store the
selected station.
Ex) To store 89.1 MHz at #1 preset button, select
the frequency(89.1 MHz) and then press #1
button for more than 2 seconds.
•
Confirming the memory state of preset button
1) Press and hold the desired preset button for
more than 2 seconds. Radio sound will be
interrupted momentarily.
2) Press the memorised preset button again. The
corresponding frequency and channel will
appear on the LCD panel.