Ddc Engine Oil Filter; Change Lever Actuator Oil - Daewoo Novus M2SEF Manual

https://www.truck-manuals.net/
•

3) Change lever actuator oil

MTC0041
3-70 INSPECTION AND MAINTENANCE

DDC Engine oil filter

(1) Remove the spin-on filter cartridges using strap
wrench, drive socket wrench, and extension,
and then drain the used oil completely.
(2) Clean the filter adaptor with a clean, lint-free
colth.
(3) Lightly coat the filter gaskets with clean engine
oil.
(4) Start the new filters on the adaptor and tighten
by hand until the gaskets touch the mounting
adaptor head. Then rotate additional one-half
turn by hands.
Caution
Overtightenting may distort or crack the filter adaptor.
Model Change intervals
At end of first 1,000km
DE
Short distance travel(in city):
every 10,000km,
Long distance travel(at high
DV
speed):
every 15,000km
Every 15,000km
DDC
(1) Oil level check
24ton dump truck is applied with hydraulic shift-
ing system and oil is supplied to the actuator of
the change lever. Therefore, it is necessary to
check oil level from time to time, and add oil if
the level of oil is below MIN mark.
(2) Required oil
Specifications: KS M 2141 Class 3
(DOT3/SAE J1703)
Oil capacity : Max - 270cc
Min - 210cc
No. of filters
1
2
2