5-156 MISCELLANEOUS CONTROLS AND OPTIONS
Drive system diagram
Driving force applied using the transmission PTO of tractor is transmitted through belt pulley to the
compressor, as shown in the following diagram. The rotor which draws in and discharges air recip-
rocates at 90 degrees.
Engine
Detail sketch of compressor
V-belt pulley
https://www.truck-manuals.net/
Trans-
mission
Crankshaft
Connecting rod
Carbon seal
PTO
Drive shaft
Connecting
Rotor
Driving arm
Pulley
(lower)
Pulley
rod
(upper)
Rotor
MTF0800