Table of Contents
Advertisement
Caution
•
Active codes
These codes will be flashed on the "Stop
Engine" light(SEL). When code flashing is
initiated, it means severe engine problem.
In this case, take a proper measure for the
engine before continuing engine operation.
CRUISE
PTO
https://www.truck-manuals.net/
MTS0631
MTA0532
MTS8200
1-27 HOW TO HANDLE THE VEHICLE
•
Cab tilt warning lamp
This lamp comes on when the cap is lifted
or locking device for cab tilting is defective.
Be sure to check the warning lamp before
driving, and check the locking device if the
lamp is on.
•
Stop engine warning lamp(DDC engine)
Indicates that engine may have serious prob-
lems, engine will stop in 30 seconds. Move
the truck to safe place immediately, Press
the switch within 30 seconds after indicator
came up for extending operation time as
much as 30 seconds for the maximum 5
times.
Caution
1. Contact the nearest dealer or service center
for the check up or repair.
2. Re-staring of engine is not enabled once
after it stopped automatically after the warn-
ing lamp came on.
3. Repeated use of engine diagnosis switch can
result in serious defect on engine, Use the
switch only in emergency.
4. Number of switch use is recorded in ECM.
•
CRUISE PTO indicator lamp(DDC engine)
This indicator shows CRUISE control is ac-
tivated, indicator comes on when CRUISE
PTO switch is turned 'on'.
Advertisement
Table of Contents
Troubleshooting
