Table of Contents
Advertisement
Caution
•
Inactive codes
These codes will be flashed on the "Check
Engine" light(CEL). When code flashing is
initiated, it means that your vehicle can be
operated but the engine has a problem.
Therefore, you must contact immediately the
nearest Daewoo Service Center for proper
service.
https://www.truck-manuals.net/
MTA0591
MTA0592
1-21 HOW TO HANDLE THE VEHICLE
•
Generator indicator lamp
The generator indicator lamp comes on
when the starter switch is turned to "ON"
position. If the generator indicator lamp
keeps lighting up while driving, have the
generator circuit checked by your nearest
Daewoo dealer.
•
Check Engine indicator lamp
1) Indicates that engine may have malfunction
if it turns on during driving.
Caution
Move to your nearest service center for check up
and repair within the earliest possible even engine still
operates.
2) For DDC engine
Press engine diagnosis switch while ignition
key positioned ON when engine problem
occurs. Such problems are to be displayed
by codes through Check Engine Indicator in
chronological order.
3) For DE12TIS engine
(1) Check Engine Indicator comes on while
ignition key positioned ON when engine
problem occurs. Such problems are to
be displayed by the codes.
(2) 1 pin connector in white can be a sub-
stitute for engine diagnosis switch on
ECU connector.
Caution
Do not remove lead seal of 1 pin connector in black,
Memory clear connector. Warranty conditions are
not to be effective in this case.
Advertisement
Table of Contents
Troubleshooting
