Table of Contents
Advertisement
8) Secure the Reader Communication Cable temporarily with the tape removed in step 4 to
prevent it from being trapped.
9) Install the handle.
• 2 Bosses
• 2 Screws (RS Tightening; M3x8)
x2
6
Installation > Installation Procedure
F-6-18
Boss
F-6-19
6
Installation > Installation Procedure
Installation Procedure
CAUTION: How to hold the Reader Unit
• When lifting the Reader Unit, be sure to work with 2 or more people. Also, be sure to
lift the equipment horizontally.
• Be sure to lift the Reader Unit carefully as it is heavy at the rear.
• When installing the Reader Unit on the host machine, be careful not to get the
cables and fingers caught.
• Be sure to hold the Reader Unit at the positions as shown in the figure.
1) Lift the Reader Unit with 2 or more people, and install it by pushing the [A] part of the
Reader against the Reader Mounting Plate (Rear) [B] on the host machine side.
6-9
F-6-20
[A]
[B]
F-6-21
6-9
Advertisement
Table of Contents
