4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (ADF) > Removing the Document Length Sensor(SR7,SR10)
Removing the Cover Open/Closed Sensor(SR6)
1) Open the feeder cover.
2) Remove the rear
cover."Removing the Rear Cover"(page 4-16).
3) Remove the cover open/closed sensor
- Connector 1 pc.
x1
4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (ADF) > Removing the Document Length Sensor(SR7,SR10)
1) Detach the cover on the reverse side of the document tray.
F-4-71
2) Remove the document length sensor
Removing the Document Length Sensor(SR7,SR10)
- Screw 3 pcs.
x3
- Connector 1 pc
x1
SR10
SR7
4-30
F-4-72
F-4-73
4-30