Before Installing: Preparation On The Host Machine Side - Canon Color Image Reader-F1 Service Manual

Before Installing: Preparation on the Host Machine
Side
1) Remove the Left Rear Cover.
• 2 Rubber Caps
• 2 Screws
• 5 Claws
x2
x5
Rubber Cap
2) Open the Right Upper Cover and the Right Lower Cover.
Right Upper Cover
Right Lower Cover
6
Installation > Before Installing: Preparation on the Host Machine Side
Claw
F-6-5
F-6-6
6 Installation > Before Installing: Preparation on the Host Machine Side
3) Remove the Right Rear Cover 1.
• 1 Screw (RS Tightening; M4)
• 2 Screws (TP; M3)
• 1 Claw
x3
Claw
4) Close the Right Lower Cover.
NOTE:
Be sure to keep the Right Upper Cover open.
Right Upper Cover
Right Lower Cover
6-5
F-6-7
F-6-8
6-5