Canon Color Image Reader-F1 Service Manual page 95

6) Route the harness.
• Guide
• 2 Wire Saddles
x2
7) Remove the handle.
• 2 Screws (The removed 2 screws will be used in step 16 to install the Left Cover.)
• 2 Bosses
x2
6
Installation > Installation Procedure
F-6-26
F-6-27
6 Installation > Installation Procedure
8) Remove the tape, and remove the Scanner System Fixation Screws.
• 2 Screws
NOTE:
Be sure to keep the 2 Scanner System Fixation Screws to use at the time of delivery.
x2
9) Remove the tape temporarily affixed to the Reader Communication Cable, and connect
the connector by passing it through the cut-off of the plate of the host machine.
Cut-off
Reader Communication Cable
6-11
F-6-28
F-6-29
6-11