Canon Color Image Reader-F1 Service Manual page 91

2) Temporarily place the equipment taken out from the box, and change the holding position.
3) Turn over the packaging box, and place the Reader Unit as shown in the figure.
CAUTION:
• Be careful not to trap the cables of the Reader Unit.
• Be careful not to drop the ADF.
6
Installation > Before Installing: Preparation on the Reader Unit Side
F-6-13
6 Installation > Before Installing: Preparation on the Reader Unit Side
CAUTION:
Be sure not to remove the tape and the 2 Fixation Screws of the Scanner System.
4) Remove the tapes affixed to the outside of the Reader Unit and the packaging materials.
(Because the removed tape will be used in step 8, keep one of the tapes which can still be
used.)
F-6-12
6-7
F-6-14
6-7