Removing The Fan; Removing The Sensor(Sr1,Sr2,Sr3) - Canon Color Image Reader-F1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (ADF) > Removing the Sensor(SR1,SR2,SR3)

Removing the Fan

1) Open the feeder cover.
2) Remove the rear cover."Removing the Rear Cover"(page 4-16).
3) Remove the fan
- Screw 1 pc
- Connector 1 pc
x1
x1
CAUTION:
Install the fan with the arrow oriented as shown.
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (ADF) > Removing the Sensor(SR1,SR2,SR3)
F-4-59
F-4-60

Removing the Sensor(SR1,SR2,SR3)

1) Remove the feed unit."Removing the Feed Unit"(page 4-13).
2) Remove the metal plate
- Screw 3 pcs.
x3
3) Remove the two timing belts.
4-26
F-4-61
F-4-62
4-26