Cleaning The Reader Scanner Mirors - Canon Color Image Reader-F1 Service Manual

4
Parts Replacement and Cleaning Procedure > Parts replacement and cleaning procedure > Cleaning the Reader Scanner Mirors > Procedure

Cleaning the Reader Scanner Mirors

■ Procedure
1) Remove the ADF Unit [1].
2) Pull out the Control Panel [2], and remove the Front Cover [3].
• 2 Screws [4]
• 2 Bosses [5]
• 1 Hook [6]
x2
4 Parts Replacement and Cleaning Procedure > Parts replacement and cleaning procedure > Cleaning the Reader Scanner Mirors > Procedure
[3]
[3]
[1]
[2]
F-4-8
CAUTION:
Grease is applied on the 2 Rail Shafts [1] of the Reader Scanner Unit. If you have
touched the grease, be careful not to put it to other parts.
3) Move the belt [1], and move the Reader Scanner Unit [2] to the cut -off of the Reader Unit.
[1]
[2]
4) Loosen the screw to release the tension applied on the belt.
5) Remove the 2 screws [1] securing the LED Unit.
4-4
[1]
[3]
[2]
F-4-9
4-4