Removing The White Plate - Canon Color Image Reader-F1 Service Manual

4
Parts Replacement and Cleaning Procedure > External Covers (ADF) > Removing the white plate

Removing the white plate

1) Open the ADF.
2) Remove the white plate.
6) Place the white plate on the copyboard glass by aligning it with the index sheet.
4 Parts Replacement and Cleaning Procedure > External Covers (ADF) > Removing the white plate
F-4-39
F-4-40
7) Close the DADF, and then open it again.
8) Press the white plate upward as shown in the figure below.
CAUTION:
If the white plate is pressed downward, it is placed on the index sheet, so be sure to
press it upward.
4-18
F-4-41
F-4-42
4-18