Before Installing: Preparation On The Reader Unit Side - Canon Color Image Reader-F1 Service Manual

5) Move the Control Panel in the direction of the arrow.
6) Route the USB Cable and the harness toward the front of the machine.
Harness
USB Cable
6
Installation > Before Installing: Preparation on the Reader Unit Side
F-6-9
F-6-10
6 Installation > Before Installing: Preparation on the Reader Unit Side
Before Installing: Preparation on the Reader Unit
Side
CAUTION:
• Be sure not to discard the packaging box since it will be used to place the Reader
Unit temporarily.
• Be sure to secure the personnel to turn over the packaging box.
• To prevent a fall, be sure not to lift this equipment while it is still in the plastic bag.
1) Unpack the Reader Unit, and remove the plastic bag.
NOTE:
While this equipment is in the packaging box, put a hand in the plastic bag to lift one
side of this equipment and remove the plastic bag half way, and then do the same thing
on the other side to remove the plastic bag.
6-6
F-6-11
6-6