Furuno FB-3101 Operator's Manual page 4

SAFETY SUMMARY
The following general safety precautions must be observed during all phases of operation, service
and repair of this equipment. Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design, manufacture and intended use of
the equipment. FURUNO assumes no liability for the customer's failure to comply with these re-
quirements.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the equipment in the presence of flammable gases or fumes. Operation of any
electrical equipment in such an environment constitutes a definite safety hazard.
KEEP AWAY FROM LIVE CIRCUITS
Operating personnel must not remove equipment covers. Component replacement and internal
adjustment must be made by qualified maintenance personnel. Do not service the unit with the
power cable connected. Always disconnect and discharge circuits before touching them.
DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT
Because of the danger of introducing additional hazards, do not substitute parts or perform any
unauthorized modification to the equipment.
DO NOT PRESS THE FB DISTRESS BUTTON OTHER THAN IN A DISTRESS SITUATION
A distress signal is sent at the moment the FB Distress button is pressed. Accidental operation
may adversely impact other rescue operations. The distress signal is automatically sent to the
closest MRCC (Maritime Rescue Coordination Centre); if you have accidentally pressed the but-
ton, inform the local MRCC immediately.
ii