Troubleshooting; Status Signalling; Alarm Panel; Ip Handset For Safety Voice - Furuno FB-3101 Operator's Manual

4.

TROUBLESHOOTING

This chapter gives guidelines for troubleshooting and provides an overview of the different means
of status signalling. It has the following sections:

• Status signalling

• Event messages
• Troubleshooting guide
• Service and repair
4.1 Status Signalling
Both the Alarm Panel, the IP Handset and the Communication Unit have means of signalling the
status of the system.
4.1.1

Alarm Panel

The Alarm Panel display can show:
Event/Status
Connected to Communication Unit FB
Fault in connection to Communica-
tion Unit
Fault in connected equipment, net-
work or configuration
Distress communication ongoing
(incoming or outgoing)
System is in Distress test mode
4.1.2

IP Handset for Safety Voice

The IP Handset for Safety Voice can show warnings and display a
list of active events in the total FleetBroadband system.
To see the list of events, press the Enter key and select [Notifica-
tions]. For a list of the event messages related to Safety Voice, see
the next section, Event messages.
For further information on the IP Handset, see the Operator's Man-
ual (OME-57050) for FELCOM251/FELCOM501.
Display
FB (flashing) without
Fault
Distress
Test
13