4.2.1
Folding Up the Treadmill
⚠
WARNING
+
Try not to operate the equipment when it is folded up.
+
The running surface must have come to a complete stop before folding.
+
Do not stand on the treadmill during this procedure.
+
If an emergency occurs, press STOP or remove the safety key to immediately interrupt the
eFOLD function.
CAUTION
⚠
+
Do not lean on the equipment when it is folded and do not place anything on top of it that
may make the equipment unstable or fall down.
࣑ ATTENTION
+
Make sure that nothing is standing next to or on top of the treadmill that can be spilled or
thrown or that makes it impossible to fold the treadmill.
+
If there is a power failure during folding, the unit must be restarted and the eFOLD function
carried out again in standby mode.
1.
Stand to the side of the treadmill.
2.
Press eFOLD UP for two to three seconds.
You will hear a beep every two to three seconds.
→
As soon as the treadmill is folded, the beep stops.
33
Need help?
Do you have a question about the CST-TX40e-2 and is the answer not in the manual?
Questions and answers