Folding Up The Treadmill; Unfolding The Treadmill - CARDIOSTRONG TX90 Assembly And Operating Instructions Manual

4.3.1

Folding Up the Treadmill

⚠ WARNING
+ Do not connect the equipment to the power supply when it is folded up. Try not to operate
the equipment when it is folded up.
+ The running surface must have come to a complete stop before folding.
⚠ CAUTION
+ Do not lean on the equipment when it is folded and do not place
anything on top of it that may make the equipment unstable or
fall down.
࣑ ATTENTION
+ Make sure that nothing is standing next to or on top of
the treadmill that can be spilled or thrown or that makes it
impossible to fold the treadmill.
1. Turn off the on/off switch and remove the plug from the outlet.
2. Use both hands to grab the supportive bar directly under the rear
part of the running mat so that you have a stable lifting point.
3. Make sure that the hydraulic brake is correctly locked and tilt the treadmill forward.
4. Make sure that you are standing safely and make sure that the locking mechanism is secure by
pulling the equipment backwards and it does not move.
4.3.2

Unfolding the Treadmill

࣑ ATTENTION
+ Make sure that nothing is standing next to or on top of the treadmill that can be spilled or
thrown or that makes it impossible to unfold the treadmill.
1. Stand behind the treadmill and push the device slightly forward towards the display.
2. To release the hydraulic brake lock, use your left foot to push the upper part of the hydraulic
brake slightly forward until the lock releases and the treadmill can be pulled back.
3. Keep holding the treadmill.
The hydraulic brake lowers itself gently downwards.
4. Once the treadmill has lowered 2/3, you can let go
of the treadmill.
32
TX90