Setup 2 - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
If the printer used is not the type listed above, additional safety measures (such as
applying an isolation transformer to supply the medical system) should be taken when the
safety of the medical system has not been evaluated. If in doubt, consult our technical
service department or your local distributor.
It is forbidden to connect or disconnect a U disk or a USB printer during the transmission
course.

10.3.2 Setup 2

Items
Measure / Analysis
Template / Position Marker /
Time Scale / Minnesota
Code / Device No.
Baseline Adjustment
RR Interval List
Grid of Thermal Report
Grid of USB Report
Prompt
2. USB printing is ineffective in the auto periodic sampling mode, auto
11~60s sampling mode, manual mode and R-R analysis mode.
3. Make sure that paper is installed in the USB printer before printing. Error
may occur if no paper is loaded in the USB Printer.
4. You should connect
electrocardiograph.
5. Print Out configuration is effective only under the AUTO or RHYT mode.
Horizontal
Confirmed By
the corresponding
WARNING
CAUTION
Default
On
Off
Off
Off
On
- 44 -
System Setup
USB printer to
Default
(Only in the U.S.)
On
Off
Horizontal
Off
Off
On
Confirmed By
the