EDAN SE-601 Series User Manual page 33

SE-601 Series Electrocardiograph User Manual
Make sure that the recorder paper, is installed in the center of the recorder, and the paper
edge is parallel with the casing edge in the direction of advancing paper, in order to avoid
paper deviation or damage to the paper edge.
When the recorder paper runs out or is not loaded, the hint message No Paper will appear on the
screen. Then you should load or replace the recorder paper immediately.
Casing
Loading/Replacing Process of Folded Paper:
Step 1)
1) Press the casing button downwards with one hand and pull the casing upwards with the
other hand to open the recorder.
2) Remove the remainder paper from the paper tray if necessary.
3) Take off the wrapper of the new folded paper, and then put it in the paper tray.
CAUTION
Step 3)
- 27 -
Operation Preparations
Paper Tray
Casing Button
Step 4)