EDAN SE-601 Series User Manual page 59

SE-601 Series Electrocardiograph User Manual
reaches the upper limit and you save an ECG report to the electrocardiograph, the hint
Memory full! Replace the earliest file? pops up.
Select On from the Replace When Memory Full list box, when the amount of stored files
reaches the upper limit and you save an ECG report to the electrocardiograph, the hint
Memory full! Replace the earliest file? does not pop up.
You can deal with the hint as follows:
1) You can just delete several stored files from the electrocardiograph to ensure the amount
of stored file not to reach the upper limit.
2) When Memory Full is displayed on the main screen, you can set Auto Save to To
External Memory to save the added ECG reports. However, the amount of stored files in
the electrocardiograph still reaches the upper limit.
2. Printing Problems
Q1: I was encountered with paper-jam, what was I supposed to do?
A1: If it happened for the first time, it might be the result of an inappropriate placement of the
paper. In this case, please open the recorder casing, pull the paper out of the paper tray, tear
the pages with rumples, and then put the paper in the paper tray again, adjust the position of
the paper carefully and close the casing.
If it happened several times, it might have something to do with your configuration. If Paper Maker is
set to Beginning or End and you frequently press PRINT/STOP to stop the printing in the auto or
rhythm mode, the rolling back recorder will cause the paper-jam. In this case, you should set Paper
Maker to No in the Recorder Setup window.
If the problem still exists, please contact the manufacturer or the local distributor for further
disposal.
Q2: The hint Paper Error is displayed on the screen, what should I do?
A2: It might be the result of unsuccessful detection of the black markers, first open the recorder
casing so as to clear the error information, and then check whether the black marker is on the
bottom of the paper. Reload the paper in the paper tray. If it doesn't work, change the paper.
If the problem still exists, please contact the manufacturer or the local distributor for further
disposal.
Q3: The hint No Paper is displayed on the screen, what should I do?
A3: Check whether the paper runs out, or the black marker is just facing the black marker
detection window on the thermal printing head, as the following figure shows.
- 53 -
FAQ