EDAN SE-601 Series User Manual page 65

SE-601 Series Electrocardiograph User Manual
flashing, and the battery recharging indicator (
Because of the capacity consumption during the storage and transport course, the battery
capacity is not full when it is used for the first time. Battery recharge should be considered
before the first use.
Recharging process:
Precharge
NOTE: The battery will automatically stop charging if you print an ECG report.
Repeated undercharging of the battery will damage the battery and reduce battery life.
3) Replacement
When the useful life of the battery is over, or foul smell and leakage are found, please
contact the manufacturer or the local distributor for replacement.
1. Only qualified service engineers authorized by the manufacturer can open the battery
compartment and replace the battery, and the battery of the same model and
specification provided by the manufacturer must be used.
2. Danger of explosion -- Do not reverse the anode and the cathode when installing the
battery.
3. When the battery's useful life is over, contact the manufacturer or the local distributor
for disposal or dispose of the battery according to local regulations.
4. Remove the battery from the electrocardiograph when the electrocardiograph isn't
used for a long time.
5. If the battery is stored alone and not used for a long time, we recommend that the
battery be charged at least once every 6 months to prevent over-discharge.
If the battery has been fully charged and requires recharging after printing only a few
ECGs, consider replacement.
Recharge at
constant current
CAUTION
WARNING
CAUTION
- 59 -
Cleaning, Care and Maintenance
) is black.
Recharge at
constant voltage
Recharge
complete