802.1X - Vitek Transcendent VTC-TNB8RFA3-2 Manual

8mp ip camera series transcendent series 8 megapixel [4k] ip cameras with matrix ir and gen. iii advanced analytics

Table of Contents

Network Camera User Manual

2. Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2, Enable

SNMPv3) according to the version of the SNMP software that will be used.

3. Set the values for "Read SNMP Community", "Write SNMP Community", "Trap Address",

"Trap Port" and so on. Please make sure the settings are the same as that of the SNMP software.

Note: Please use the different version in accordance with the security level you required. The

higher the version is, the higher the level of the security is.

4.6.6 802.1x

If it is enabled, the camera's data can be protected. When the camera is connected to the

network protected by the IEE802.1x, user authentication is needed.

Table of Contents