Lens Control - Vitek Transcendent VTC-TNB8RFA3-2 Manual

8mp ip camera series transcendent series 8 megapixel [4k] ip cameras with matrix ir and gen. iii advanced analytics

Table of Contents

Network Camera User Manual

of interest. This area will have a higher bitrate than the rest of the image, resulting in better

image quality for the identified area.

1. Check "Enable" and then click the "Draw Area" button.

2. Drag the mouse to set the ROI area.

3. Set the level.

4. Click the "Save" button to save the settings.

4.2.6 Lens Control

This function is only available for the model with motorized zoom lens. Within this section,

zoom and focus can be controlled. If the image is out of focus after a manual adjustment, one

key focus can be used to set the focus automatically. Go to Config→Image→ Zoom/Focus

interface to set.

Table of Contents