Network Configuration; Tcp/Ip - Vitek Transcendent VTC-TNB8RFA3-2 Manual

8mp ip camera series transcendent series 8 megapixel [4k] ip cameras with matrix ir and gen. iii advanced analytics

Table of Contents

Network Camera User Manual

※ Configuration requirements of camera and surrounding area

1. Cameras must be installed in an area with stable and adequate light sources.

2. The installation height ranges from 6 to 12 feet, adjustable according to the focal length of

different lenses and object distances.

3. The depression angle of the camera should be less than or equal to 15°.

4. The object distance depends on the focal length of the lens mounted in the camera.

5. To ensure the accuracy of face detection, the captured faces are only allowed to deviate less

than 30° left or right or 20° up or down.

6. The following scenes are not applicable, like crowded scenes (airport, railway station, square,

etc.), backlight scenes, crossroads and so on.

4.6 Network Configuration

Go to Config→Network→TCP/IP interface as shown below. There are two ways for network

connection.

Use IP address (take IPv4 for example)-There are two options for IP setup: obtain an IP

address automatically by DHCP and use the following IP address. Please choose one of the

Table of Contents